1290 CO2 Laser Engraver Cutter
Model: HY-1290
Type: CO2 Laser Engraving Cutting Machine
Products Introduction: The CO2 Laser Engraver Cutter combines precision and versatility, offering an efficient solution for engraving and cutting tasks. With its powerful CO2 laser technology, it can handle a wide range of materials, providing high-quality and intricate results. Unleash your creativity with this cutting-edge machine.
Product Introduction
- Precision Cutting: Achieve intricate and precise cuts with the CO2 laser technology, allowing for detailed designs on various materials.
- Versatile Engraving: Engrave on a wide range of materials, including wood, acrylic, leather, and more, unlocking endless creative possibilities.
- User-Friendly Interface: With an intuitive interface, easily control settings and parameters for efficient and accurate engraving and cutting.
- High-Speed Performance: Experience fast and efficient results with the high-speed capabilities of the CO2 Laser Engraver Cutter, increasing productivity and saving time.
Product Details
Machine Optional Parts
Specification
Model | HY-1290 | ||||
Standard Laser power: | 80w | ||||
Optional Laser power: | 60w,100w,130w,150w | ||||
Engraving Area | 1200x900mm/ 47.24×35.43inch | ||||
Gross power | 1600w | ||||
Laser type: | CO2 glass laser tube | ||||
Cutting depth: | Acrylic 0-20mm, others material(varied according to the nature) | ||||
Engraving speed : | 0-1000mm/s | ||||
Cutting speed: | 0-600mm/s | ||||
Resetting positioning accuracy: | <0.01mm | ||||
Maximum forming character: | Figure/English: 1x 1mm | ||||
Power supply: | 220V±10% 50HZ or 110V±10% 60HZ | ||||
Software supported: | ArtCut, PhotoShop (Conversion output) CorelDraw, AutoCAD, Lasercut (Direct output) | ||||
Main Graphic format supported: | PLT/DXF/BMP/AI (Direct output) | ||||
Engraver for Curve surfaces: | Rotary clamp is optional and used to engrave on curse surfaces | ||||
Water Cooling: | Yes | ||||
Maximum Height of | 270mm/10.63in.(Up and down adjustable by motor) | ||||
Laser tube(life hours): | 3000-4000 hours/ reci 8000-10000 hours | ||||
Certificate | CE/FDA | ||||
Assistant Equipment: | Dual red dot pointer | Water pump | Air pump | Exhaust Fan | Flat aluminum-alloy table slat worktable |
Spare Parts Recommend (R): Laser Tube, Lens, Mirror | |||||
Options: Motorized up-down table, Rotary clamp, Water chiller, Auto focus, Honeycomb worktable | |||||
Video Show
Applicable
Applicable materials:
wood, MDF, balsa, timber, veneer, plywood, bamboo, acrylic, crystal, glass, plexiglass, mirror glass, textiles, garments plastics, PMMA, paper, cardboard, foam, foils and films, packaging film, PES, Laminate sheet, double color board/plate, granite, marble, slate, leather, rubber, ceramic and other nonmetal materials.
Applicable industries:
advertisement, arts and crafts, gifts, printing and packaging, leather industry, garment cloths industry, model industry, gravestone/combstone industry, photographic sutio industry, computerized embroidery and clipping, paper industry and decoration industry.
Customer Feedback
We value our customers’ opinions and are delighted to share their feedback. We take pride in exceeding expectations and providing exceptional customer experiences.
FAQs
Yes, the depth of engraving with a CO2 laser machine can be controlled by adjusting the power, speed, and number of passes. Higher power and slower speed can result in deeper engravings, while multiple passes can achieve greater depth.
CO2 laser machines are better suited for non-metallic materials, while fiber laser machines are primarily used for marking and cutting metals. Fiber lasers have higher power density, allowing them to efficiently cut through metal, whereas CO2 lasers are better for engraving and cutting non-metallic materials.
Yes, CO2 laser machines can cut paper with precision and minimal heat-affected zone. Proper machine settings and adjustments should be made to prevent excessive burning or charring of the paper edges.
Maintaining proper focus is crucial for optimal engraving and cutting results. Most CO2 laser machines have a focus lens that can be adjusted manually or automatically. Follow the manufacturer’s guidelines to determine the correct focus distance based on the material thickness.
Yes, CO2 laser machines can engrave on glass by creating micro-fractures on the surface. This results in a frosted or etched appearance. Laser settings and techniques may vary depending on the type and thickness of the glass being engraved.
